Pro-Reel® RTV 300 Overview
The RTV300 is designed to fit into most rugged terrain vehicle tubs or in the back of a ute.
Designed with operator safety and convenience in mind the RTV300 features a forward mounted 300L chemical tank for extra stability. In addition a rear mounted single 100m Pro-Reel® is fitted and provides a compact layout suited to most RTV vehicle tubs.
The petrol engine driven pump is rated at 40 l/min @ 40 bar (580psi), this allows the operator to apply large volumes of chemical over a large area in a very short amount of time. Excess flow from the pump is used to keep the chemical tank well agitated, ensuring a good even chemical to water mix at all times.
The Pro-Reel® is a remote controlled automatic rewind hose reel that is powered by a 12 volt motor completely removing the need to manually wind up the hose after completing your spraying tasks. The Pro-Reel® will make your spraying simpler, safer and quicker.
- 2 channel radio receiver (200m range)
- 12dc motor with adjustable v-belt
- Anti-corrosion poly reel plates
- A swivel hose feeder with 360º rollers evenly distribute the nylon hose
- High flow stainless steel internal inlet shaft with stainless external hardware ensure the reel can withstand the harshest environments
Pro-Reel® key features
A powerful two channel radio receiver (433 MHz FM) with a 200m range controls the Pro-Reel® rewind function. the remote features a single button motor shutdown for emergencies whil a manual override switch allows the hose to be rewound if the remote loses power, is damaged lost.
Nylon 12 hose
Nylon 12 hose is the toughest, anti kink hose available. With an OD of 8mm and a thin wall it enables 50, 100 or 150 metres of hose to neatly fit to the reel while providing minimal pressure loss. This hose is Ideally suited to the pro reel due to it’s high pressure rating and super slip outer surface.
A simple 12 volt, 150w high torque motor is used which draws 16amps and drive at 450 rpm. The motor drives the reel via a simple V belt configuration at around 6 klm/hr which is a comfortable walking speed.
A quality Udor 3 way manual controller is used which features pressure regulation and a complete bypass flow dump valve for easy engine starting and precise pressure adjustment. The controller will handle up to 120 l/min of flow and 580 psi pressure.
Turbo 400 gun
The turbo 400 gun is used across the range and it handles up to 70l/min of flow and 700 psi of pressure. It features a trigger lock handle with an easy adjustment lever from a straight stream to a fan. A hose swivel is fitted to eliminated hose tangles.
Handy Jerry can tray, holds a 5 litre Jerry can, max size of 270 x 190mm. *Jerry can not included
Motor / pump
Quality Udor high pressure diaphragm pumps are used across the range. The pumps are perfectly matched to suit the desired tank size and sprayer configuration and are coupled to the Honda engine via a 6:1 reduction gearbox. This pump and motor combination delivers an excellent mix of reliability, pressure and spray volume. The engine has a 3 year warranty. (Jerry can not inluded)
|Dimensions||W (mm)||L (mm)||H (mm)|
Specifications "Work Ready"
|Tank size ||300 Litres|
|Engine||Honda GX200 manual start|
|Pump||Udor 40 l/min 580 psi twin diaphragm|
|Controller||Manual 3 way, manual pressure adjustment with dump valve|
|Remote rewind||200m range 12v dc electric motor 150w 450 rpm 16 amp draw|
|Remote shutoff||Remote engine and pump shut-off 200m range|
|Spray gun||Turbo 400, adjustable spray pattern|
|Suction filter||50 mesh with shut-off|
|Chassis||Fully welded RHS / tubular construction|
|Hose reel drive system||12v dc motor with adjustable v-belt|
|Nozzle sizes||1.5, 2.0, 2.5, 3.0 and 3.5mm (2.5mm standard)|
|Reel||Anti-corrosion poly disc, stainless inlet shafts an external hardware|