For farmers or contractors looking for a higher capacity 3PL with larger tank volumes and wider booms the medium frame range has you covered.
Central to the design is the high strength frame which can support a 1200L tank and booms in three different styles of up to 18m in width. Each sprayer is individually built to suit your requirements from our extensive range of options.
Typical uses
| Features | 1200L |
|---|---|
| Broadacre spraying | ✓ |
| Rowcrop spraying | ✓ |
| Vegetable spraying | ✓ |
| Horticultural spraying | ✓ |
| Weed control | ✓ |
| Pest control | ✓ |
| Industrial spraying | ✓ |
| Municipal spraying | ✓ |
| Contracting | ✓ |
| Specialised cleaning | |
| Inoculent spraying | |
| Fertiliser application | ✓ |
| Fire Fighting | |
| Water transfer | |
| Irrigation | |
| Washdown |
- The frame utilizes metric size Australian made steel to create a light yet extremely strong structure. The key to its strength is the combination of square and rectangle hollow sections (SHS & RHS) and precision laser cut plates placed in strategic locations. The frame is also very narrow which helps to keep the boom as close as possible to the tractor wheels for better weight distribution. Wide retractable support legs provide stability when the sprayer is disconnected from the tractor.
- Goldacres four stage paint process. 1. Grit blasting which cleans and prepares the steel surface for the ultimate paint adhesion. 2. High build primer / filler flattens out the surface and is key to giving the top coat not only an optimum substrate to adhere to but that smooth “wet” look. 3. Wet top coat using the highest quality Australian made paint. Specially formulated for Goldacres, the top coat provides a finish which has excellent mar resistance (the resistance to abrasive action like scratching) and also a very high tolerance to aggressive chemicals. 4. High-temperature baking which cures the paint
- Australian made 1200L rotationally moulded thick wall UV stable tank with an extra deep centre sump design. Smooth internal wall aids rinsing and decontamination.
- 45L rinse tank is fitted which can be used to flush out the pump and boom lines at the end of the spray job whilst still in the field.
- Extra large hinged lid makes pouring in liquid or powder chemicals mess free.
- High volume high pressure (140 l/min 20 bar) three piston diaphragm pump with 540 rpm PTO shaft provides smooth consistent water flow to the boom or spray gun.
- A pump suction filter with three-way ball valve allows the operator to switch between drawing from the main tank and the rinse tank. The off position also allows the strainer to be removed and cleaned even when the sprayer tank is full.
- Twin pressure line filters greatly reduce the chances of nozzle blockages. The first filter is a coarse mesh while the second is finer.
- Venturi agitator fitted to the tank greatly improves the consistency of the tank mix over the course of the spray job.
- 23L handwash tank with provision to store a liquid soap dispenser
- Chemical venturi probe is used to draw chemicals into the main tank. This type of chemical induction means that at no stage does neat chemical come into contact with the pump, which could cause corrosion problems.
- Top mounted bottom fill allows the water to be pumped in through the top of the tank and down to the bottom. This method reduces foaming and also minimises the risk of contaminating the water source if the transfer pump stops unexpectedly.
- All spray hoses are constructed using a Nitrile liner. This liner helps resist the effects of the most aggressive of chemicals from damaging the hose.
- Electric section and pressure regulation control is fitted for easy in cab adjustment. While an external control station is used to operate auxiliary functions like chemical transfer and agitating. An adjustable pressure regulator valve is fitted to set the maximum system pressure.
- Front mounted tank level sight tube allows the operator to visually check from within the tractor.
Induction hopper. The 40L capacity chemical induction hopper is an integrated chemical transfer system that allows liquids, granular and powdered products to be measured and transferred into the main tank. The hopper has both drum and internal rinsing capabilities. The high flow venturi is mounted at the base of the hopper which draws chemical into the water stream at that point, minimising the chance of blockages.
Plumbed from the external filling point the internal tank rinse nozzle with rotating head quickly and easily decontaminates the inside of the tank.
Raven SCS450 controller adjusts the flow rate according to speed to maintain a consistent spray application rate. Features include up to five boom section control, two pre-set application rates plus a manual mode, display of ground speed and flow rate plus other counters.
ISO BUS control system. This system allows the sprayer to be controlled using a virtual terminal (VT) which might also be used for other duties, like mapping or tractor steering. The brains of the system, called a node is mounted to the sprayer, this node does all the control work. The VT simply displays and communicates all the information to the operator.
Do away with the pto shaft with a hydraulic drive kit. Neatly adapts to the existing pump and is run directly from the tractor remotes. When used in conjunction with the Raven SCS450 then pump rpm can also be monitored. If a non-Raven monitor is fitted then Goldacres can supply a separate pump rpm monitor.
Double sided 22L foam marker is ideal for operators wanting a cost effective method of guidance. Can switch from left to right hand side within the cabin.
30m hose reel with a choice of three different spray guns, TeeJet AA30, TeeJet AA43 and Turbo 400
| Features | With Krono style booms | With Delta style booms | With Crossover style booms |
| 140 l/min diaphragm pump with PTO drive | Standard | ||
| Hydraulic drive for pump | Option | ||
| 30m manual wind hose reel | Option | ||
| AA30 gunjet | Option | ||
| AA43 gunjet | Option | ||
| Turbo 400 gunjet | Option | ||
| Top mounted bottom fill | Standard | ||
| Chemical venturi probe | Standard | ||
| Tank agitator | Standard | ||
| Suction filter & twin pressure filters | Standard | ||
| Rinse tank 45L | Standard | ||
| Separate 23L hand wash tank | Standard | ||
| Foam marker double sided 22L | Option | ||
| In cab section control with electric pressure regulation | Standard | ||
| Automatic rate controller Raven SCS450 | Option | ||
| ISO BUS control system | Option | ||
| Boom plumbed in 3 sections | Standard | ||
| Boom plumbed in 4 sections | Option | ||
| Boom plumbed in 5 sections | Option | ||
| Fence line nozzle single sided | Option | ||
| Fence line nozzle double sided | Option | ||
| Fence line nozzle single sided electric | Option | ||
| Fence line nozzle double sided electric | Option | ||
| Trijet nozzle bodies | Option | ||
| Krono 12m boom | Option | N/A | |
| Krono 15m boom with hydraulic lift & slant | Option | N/A | |
| Hydraulic lift to suit Krono 12m boom | Option | N/A | |
| Boom slant kit to suit Krono 12m boom | Option | N/A | |
| Delta 12m boom | N/A | Option | N/A |
| Delta 15m boom | N/A | Option | N/A |
| Delta 18m boom | N/A | Option | N/A |
| Individual boom wing tilt | N/A | Option | N/A |
| Crossover 10m boom | N/A | Option | |
| Crossover 12m boom | N/A | Option | |
| Roller lift boom tower with 900mm travel and suspension | N/A | Std | N/A |
| Hydraulic boom height adjustment with 900mm | N/A | Option | |
| Twin link suspension suit crossover booms | N/A | Option | |
| Electric over hydraulic spool valves for boom functions | Option | N/A | |
Reviews
There are no reviews yet.