Prairie Pro – 5000-8500L

The Prairie Pro represents the very best money can buy in the trailing sprayer market.

Renowned for its rugged construction, class leading boom ride, cutting edge performance and standard features the others call options, the Prairie Pro will transform your spraying operation.

The Prairie Pro comes in four product tank sizes – 5000L, 6500L, 7500L and 8500L with TriTech boom widths ranging from 24 to 48m*. Multiple wheel track and tyres sizes also available. There is a sprayer to suit all farm sizes and configurations. Read on and learn why the Goldacres Prairie Pro has set the standard in trailing sprayers for over 40 years. (*Prairie Pro 8500L only)

Typical uses

Features 5000L 6500L 7500L 8500L
Broadacre spraying  ✓  ✓  ✓
Rowcrop spraying  ✓  ✓  ✓  ✓
Vegetable spraying  ✓  ✓  ✓  ✓
Horticultural spraying  ✓  ✓  ✓  ✓
Weed control  ✓  ✓  ✓  ✓
Pest control  ✓  ✓  ✓  ✓
Industrial spraying
Municipal spraying
Contracting
Specialised cleaning
Inoculant spraying
Fertiliser application  ✓  ✓  ✓  ✓
Fire Fighting
Water transfer
Irrigation
Washdown

Features overview

EZ Control Station
EZ Control Station

The EZ control station clearly places all the filling and flushing functions in the one convenient location. All valves are colour coded and clearly labelled for easy identification and operation. The EZ control station is protected from mud and debris generated from the tractor wheels by a fold down cover. When opened a quick start guide is also visible. A convenient storage locker with internal shelving is provided for Personal Protective Equipment (PPE) or tools as well as a hand wash container with soap dispenser.

Airbag suspension
Airbag suspension

The airbag suspension system* uses a combination of rubber bushes, rolling lobe air springs, heavy duty dampeners and a ride height levelling valve to help provide the best possible ride for the chassis and boom. The axle is bolted in place allowing different track widths from 2000mm** to 3048mm (120”) achievable. Compatible with the smart steer option*** which allows the sprayer wheels to exactly track the tractors wheels.

* Optional on 5000 and 6500L, standard on 7500 and 8500L. ** Dependant on tyre width, 7500L & 8500L models minimum track width 2200mm. Other wheel tracks available on request *** Smart Steer option available on 5000 and 6500L only

Hydraulic drive pump

Hydraulic drive pump
80cc geroler hydraulic motor option replaces the standard PTO shaft. Complete with rpm sensor for accurate in-cab pump speed readout.

MP4000 pump
The ARAG MSP400 multistage centrifugal pump. The pump is constructed using five impellers mounted to a common shaft which provides a more linear flow over a wide pressure range. The pump is rated to 400 l/min at 8 bar pressure. RPM sensor and oversize suction filter means the operator can be confident that adequate pump performance is being achieved.

Construction overview
Construction overview

To build the best sprayer you have to start with a solid platform

The Prairie Pro design incorporates many elements from the transport and earthmoving industries to ensure maximum strength, longevity and performance. Features like fully bushed pivot points, air ride suspension components and dampeners, to the best corrosion proof painting systems. Fully welded in rotating positional jigs ensures accuracy, repeatability and quality all combined with the experience gained with thousands of sprayers in the field.

  1. Chassis. Manufactured from high strength heavy walled 200x100mm RHS to minimise flexing and provide a stable platform for boom mounting. The rear chassis section is stepped in with integral boom and tank support allowing narrow wheel track and steering axle options*. Long wheel base (axle to drawbar) provides excellent boom yaw stability and reduces sideways pushing forces at the tractor.
  2. Drawbar pull. Polyurethane cushioned connection points reduces chassis and tractor drawbar stress. Narrow drawbar final section allows tighter headland turning. Full 360º swivel forged tow eye ensures maximum articulation between sprayer and tractor.
  3. Walk-through platform. Access the main tank easily and safely from either side of the sprayer. No need to walk around the sprayer or tractor to access the other side. Open foot treads provide safe access to the platform in muddy conditions. Lower portion of treads folds up out of the way when not in use.
  4. Air bag suspension**. Specifically designed for the Prairie Pro the air bag suspension system provides a smooth soft ride for both trailer and boom whilst still limiting excessive body roll. This is achieved through the use of the large diameter bi-functional rubber bush pivot system coupled with heavy walled torque tube construction. The bolt in axle also doubles as the air reservoir for the ride height levelling and boom nozzle shut off systems.
  5. Roller boom rest. The adjustable height boom rests with rubber roller supports provide a soft contact point for the boom wings, minimising the chance for damage.
  6. Boom parallelogram lift. The mechanism provides 1200mm of boom height adjustment as well as the vertical boom suspension. Three heavy walled torque tubes and diagonal bracing ensure less flexing which increases boom roll and yaw stability.
  7. TriTech boom centre section. Using lightweight trussing techniques the boom centre section is both light yet extremely strong. All high load pivot points are fully bushed and greaseable, ensuring a long service life and optimum boom suspension performance.
  8. Hydraulic cylinders. All hydraulic cylinders use quality hardened greasable ball ends firmly bolted in position, ensuring minimal joint movement and maximum boom control.
  9. Paint system. All major components are fully grit blasted using a fractured steel shot, essential for excellent paint adhesion. The bare steel components are then treated using a high build filler primer which flattens the blasted surface. All non welded joints are seam sealed then top coated using a Goldacres specific chemical resistant paint formula. Finally all components are baked in a high temperature oven until fully cured.
  10. Mechanical jack*. The swing back mechanical jack folds up out of the crop quickly and easily. No need to connect hydraulic hoses for jack operation.
  11. Full modular construction technique allows many options to be easily added at the time of build or at a later date as required. Dealer fitted options (DFO) can be retro fitted without the need for welding or drilling existing components.

*5000L & 6500L models only **Airbag suspension optional on 5000L & 6500L, standard on 7500L & 8500L

A sprayer is only as good as its boom
A sprayer is only as good as its boom

Today’s sprayers are full of bells and whistles which makes spraying a whole lot easier, comfortable and efficient, but it’s easy to forget what the end goal is. Precise chemical application.

Boom control can be the difference between a good spray result, and no result at all. Goldacres understand this and it is why all our sprayer designs are centred around the boom first and foremost.

Why do Goldacres booms ride so well?

Goldacres pioneered the use of lightweight aluminium in the outer boom wings over two decades ago. The philosophy was, and still is today, that mass on a boom is fine so long as it is as close to the centre as possible. Reduced mass on the boom extremities reduces boom forces in both yaw and roll. This combined with the unique boom suspension results in a very stable boom ride, regardless of the terrain.

TriTech booms are contour following, meaning that the boom level will be referenced to the sprayer chassis and not purely on gravity such as a pendulum boom. This allows the sprayer to transverse the sides of hills and contours whilst keeping the boom level to the ground at all times. This results in placing the nozzle at the optimum height above the target.

TriTech Booms
TriTech Booms

Strength, Stability, Reliability & Control

The TriTech boom range is designed for operators who demand the utmost performance, reliability and control. Time and time again the TriTech boom has been named “No.1 for boom stability”* which at the end of the day, results in a superior spray result.

Features such as hydraulic yaw which precisely controls the forwards and backwards movement of the boom wings to minimise the under and over applying of chemical is now standard on all widths.

The strategically placed centre section suspension links help isolate the sprayer chassis movement over rough terrain. Combined with the tuned damping characteristics allows precise roll control enabling an optimal and consistent nozzle height to be maintained, even without the use of electronic height control systems.**

All TriTech booms are constructed using lightweight trussing techniques, which allows for a stronger design without weight, the enemy of boom agility.


*Kondinin Group’s Farming Ahead magazine 2012, 2014 & 2017. **Height control systems may be required in some extreme situations ^42m TriTech boom

Boom sizes and models for trailing sprayers

Sprayer 24m 28m 30m 33m 36m 48m
5000L More info More info More info More info More info
6500L More info More info More info More info More info
7500L More info More info More info
8500L More info More info More info More info
Boom suspension explained
Boom suspension explained

Pitch, roll and yaw boom suspension
A boom which bounces, sways or yaws deposits chemical unevenly on the target. This can result in weed escapes and may even contribute to resistant weeds.

The Goldacres TriTech suspension system has been developed to provide you with the best boom ride possible and assist in an accurate application. Working in conjunction with the chassis airbags* the boom features three way suspension that works to reduce boom pitch, roll and yaw – the three enemies of accurate application. A combination of springs and shock absorbers, as well hydraulic cylinders and accumulators all work together to provide the best boom ride possible. The TriTech suspension system has contributed to Goldacres consistently having the best boom ride when measured against competitor machines.

*Airbags optional

Yaw
Hydraulic yaw – Two opposing hydraulic cylinders are mechanically connected together either side of the pivoting boom centre section.
As the centre yaws one cylinder is retracted, the other is extended.
This results in oil movement which compresses in a nitrogen charged accumulator. The result is precise boom yaw control.

Roll
Delta links – The key to the superior boom ride is the strategically placed delta links. In all there are four links. Each link features spherical ball ends which allow the centre to move in all directions.
Roll centre point – The roll centre point is the location at which the boom pivots around, both in roll & yaw.
Roll dampeners – Reduces high frequency oscillation of the boom roll.

Application Technology - RapidFire
Application Technology - RapidFire

Over the last several years there has been a greater shift to precision farming technologies, such as auto steering and automatic boom section control. Both of these technologies are aimed at reducing spray overlaps and unsprayed areas, the former potentially causing crop burning and overuse of chemical. Depending on the field size and shape the wastage can be quite substantial. Goldacres have developed these practices further by introducing RapidFire air controlled nozzle shut off capability.
Traditional systems use motorised boom section valves to control water flow to the nozzles. Wider booms in conjunction with an increased number of spray sections means a substantial amount of plumbing is required, thus increasing the delay in spray on and off times. In addition, the further the nozzle is from the centre of the boom the longer the delay becomes. RapidFire overcomes these problems by putting the switching capability right at the nozzle.

Small airlines at each nozzle switch the flow on and off in a fraction of a second, and more evenly across the boom width. Boom line plumbing is also greatly reduced, which quickens line priming and flushing as well as simplifies plumbing.

Application technology - RapidFlow
Application technology - RapidFlow

Boom stability is only part of the chemical application story, optimum droplet sizing, pressure, nozzle flow rate and spray uniformity across the boom width are all critical to accurate chemical application

RapidFlow – Boom Recirculation* allows the sprayer boom lines to be fully primed without spraying a single drop. This reduces wastage at the start of a tank load or when switching chemicals. RapidFlow can also be used to thoroughly flush out the boom lines without the need to physically spray on the ground.

  1. Bank to main tank
  2. Electric ball valve
  3. Nozzle body with RapidFire

*RapidFire is not compatible with Direct Chemical Injection (DCI)

Application Technology - 3TS
Application Technology - 3TS

Nozzle technology has advanced in leaps and bounds over the years and a strong emphasis on drift control has influenced many nozzle designs, including air induction (AI) technology

The spray nozzles operating pressure range and size determine the application rate and speed band at which the driver must adhere to. This band is usually quite narrow. To overcome this Goldacres offer a 3 tier system (3TS) which effectively gives the driver a much wider operating band whilst still maintaining optimum droplet size. Think of 3TS as a three step gearbox. Each nozzle type has an operating pressure band for a given droplet size. As the first nozzle reaches the top of the pressure band it switches off and the next larger size nozzle switches on. When that nozzle reaches the top of that pressure band the first nozzle will switch on again, effectively giving three operating bands.

Control freaks!
Control freaks!

In today’s fast-changing precision farming landscape it is easy to be left behind in the technology stakes.

That’s why Goldacres make it easy, with multiple solutions from the basic requirements to the top end needs.

For more than 2 decades Goldacres have relied on Raven to provide complete flow control systems with matched components to give, quite simply, unmatched flow control accuracy and stability.

At the heart of the control system is a positive displacement pump which runs at a consistent rpm. This creates known flow rates across varying pressures, essential for accurate and stable flow control. In addition, two system critical components, a flow meter and three-way regulator valve, combine to help achieve fast “on target rate”, plus greater flow stability with assured tank agitation.

ISO BUS systems

Sprayer cabins can get pretty busy with the vast range of systems requiring individual control consoles. The ISO BUS standard brings all the systems together into the one display, called a virtual terminal (VT). Essentially each system contains the brains, while the VT is simply the interface between the two. This means only one operator console is required. Goldacres offer the option for ISO BUS compatibility, allowing numerous leading VT displays to take over the sprayer control duties. Features like 3TS, pump speed readout, ultrasonic boom leveling plus sprayer steering and task control applications can all be monitored by the one display.

SCS4400 systems

The proven SCS4400 sprayer console provides simple, fuss-free control of the liquid flow duties. The SCS4400 features up to 7 boom section control switches (expandable to 10), manual pump speed readout, ground speed, three-tier system (3TS), Direct Chemical Injection (DCI) as well as several counters such as area and volume. If you are looking to further expand the capabilities, then the SCS4400 is compatible with most leading automatic section controllers on the market.

Raven RCM

The Prairie Pro can be fitted with the optional Raven Control Module (RCM). The RCM features dual nodes which enable 2 screens to be used simultaneously, up to 16 boom section control and remote diagnostics via Bluetooth.

Chemical Handling
Chemical Handling

SuperFlow 60L Induction Hopper

Lower the hopper into the loading position by simply releasing the spring-loaded catch, the SuperFlow hopper enables you to load powders, granules and liquids fast – up to 20 kg/min (Atrazine) using a large flow venturi system. The SuperFlow uses a flanged 2” port tap with a large handle that’s easy to grip while wearing PPE and features push down drum rinse nozzle, tank flushing nozzle and simple tank level calibration.

Transcal

The 45L Transcal is a simple and effective way of transferring and measuring liquid chemical. Using a venturi the transcal can draw chemical from an open container using a probe or out of an envirodrum to provide a totally enclosed transfer system.

The transcal measures chemical transferred by volume, not flow, giving consistent accuracy regardless of the liquid viscosity.

Venturi Probe

Standard on all models across the range, the probe is a simple method of transferring chemical into the main tank directly from a drum. It uses a venturi mounted in the main product tank.

Chemical transfer pump

The 12-volt chemical transfer pump has an open flow of up to 40 l/min and can transfer chemical from any container using a probe or envirodrum coupling.

The chemical transfer pump features an optional flow meter to keep track of how much chemical has been transferred, providing a completely stand-alone transfer system at the flick of a switch.

Specifications

Electric over hydraulic spool valvesDouble pilot checks with flow controls on all circuits. Open or closed centre systemDouble pilot checks with flow controls on all circuits. Open or closed centre systemDouble pilot checks with flow controls on all circuits. Open or closed centre systemDouble pilot checks with flow controls on all circuits. Open or closed centre systemBoom height controlOptionalOptionalOptionalOptionalRapidFire with RapidFlowStandardStandardStandardStandard3TSOptionalOptionalOptionalOptionalTriJetsOptionalOptionalOptionalOptionalElectric operated fenceline nozzlesOptionalOptionalOptionalOptionalRemote grease nipple bankOptionalOptionalOptionalOptionalDrum storage rackOptionalOptionalOptionalOptionalChemical induction hopper 60LStandardStandardStandardStandardChemical transfer pumpOptionalOptionalOptionalOptionalDimensions4200 H x 3450 W x 9850mm L*4200 H x 3450 W x 9850mm L*4200 H x 3450 W x 10500mm L*4200 H x 3450 W x 10800mm L*

Feature 5000L 6500L 7500L 8500L
Chassis Fully welded modular construction 200 x 100 x 6mm RHS with stepped in rear section. Cushioned drawbar Fully welded modular construction 200 x 100 x 6mm RHS with stepped in rear section. Cushioned drawbar Fully welded modular construction 200 x 100 x 9mm RHS. Cushioned drawbar Fully welded modular construction 200 x 100 x 9mm RHS. Cushioned drawbar
Stub axle type 90mm 90mm 110mm 110mm
Axle type Rigid axle – standard.
Air bag suspension – optional
Rigid axle – standard.
Air bag suspension – optional
Air bag suspension – standard Air bag suspension – standard
Axle track width 2050mm – standard
3000mm – optional (other widths on request)
2100mm – standard
3000mm – optional (other widths on request)
2200mm – standard
3000mm – optional (other widths on request)
2200mm – standard
3000mm – optional (other widths on request)
Brakes Optional Optional Optional Optional
Wheel and tyre sizes 18.4 x 38 – standard
520/85R42 HR45 XLOAD – optional
480/80R46 – optional
18.4 x 38 – standard
520/85R42 HR45 XLOAD – optional
480/80R46 – optional
520/85R42 HR42 XLOAD – standard
520/85R46 – optional
520/85R42 HR42 XLOAD – standard
520/85R46 – optional
Mudguards Full length poly mudguards Full length poly mudguards Full length poly mudguards Full length poly mudguards
Towbar Optional Optional Optional Optional
Rate controller Raven SCS4400 – standard
ISO BUS control – optional
Raven RCM – optional
Raven SCS4400 – standard
ISO BUS control – optional
Raven RCM – optional
Raven SCS4400 – standard
ISO BUS control – optional
Raven RCM – optional
Raven SCS4400 – standard
ISO BUS control – optional
Raven RCM – optional
Spray pump 260 l/min with hydraulic drive – standard
400 l/min multistage centrifugal – optional
260 l/min with hydraulic drive – standard
400 l/min multistage centrifugal – optional
260 l/min with hydraulic drive – standard
400 l/min multistage centrifugal – optional
260 l/min with hydraulic drive – standard
400 l/min multistage centrifugal – optional
Filtration 1 x Suction, 1 x pressure,
1 x 2” filling & nozzle filters – standard.
1 x Suction, 1 x pressure,
1 x 2” filling & nozzle filters – standard.
1 x Suction, 1 x pressure,
1 x 2” filling & nozzle filters – standard.
1 x Suction, 1 x pressure,
1 x 2” filling & nozzle filters – standard.
Water transfer (filling) 2” integrated fill point – standard
2” Fill flow meter – optional
3” hydraulic pump – optional
3” separate side fill – optional
2” integrated fill point – standard
2” Fill flow meter – optional
3” hydraulic pump – optional
3” separate side fill – optional
2” integrated fill point – standard
2” Fill flow meter – optional
3” hydraulic pump – optional
3” separate side fill – standard
2” integrated fill point – standard
2” Fill flow meter – optional
3” hydraulic pump – optional
3” separate side fill – standard
Main tank drain 3” remote operated with cam lock fitting 3” remote operated with cam lock fitting 3” remote operated with cam lock fitting 3” remote operated with cam lock fitting
Main tank capacity 5000L 6500L 7500L 8500L
Rinse water tank capacity 400L 400L 400L 400L
Tank rinse nozzles Twin rotating Twin rotating Twin rotating Twin rotating
Boom type and size TriTech 24m, 28m, 30m, 33m, 36m TriTech 24m, 28m, 30m, 33m, 36m TriTech 30m, 33m, 36m TriTech 30m, 33m, 36m, 48m
Boom breakaway Outer wing break back plus 3D mechanism on last section Outer wing break back plus 3D mechanism on last section Outer wing break back plus 3D mechanism on last section Outer wing break back plus 3D mechanism on last section
Hydraulic yaw Standard Standard Standard Standard
Individual wing tilt Optional Optional Optional Optional
Bi-fold out boom wing Optional Optional Optional Optional

* Dimensions are caculated on a sprayer fitted with a 36m boom and standard tyre fitted. Height is taken from top of cable drum

Brochures / Catalogues
  • 5000-8500L Prairie Pro
  • 2019
  • 2
  • GA8700412-R2
  • 5mb
  • View Online
  • Download
  • Mark Roberts interview - Goldacres Prairie Pro 8536 trailed sprayer

Reviews

There are no reviews yet.

Be the first to review “Prairie Pro – 5000-8500L”

Your email address will not be published. Required fields are marked *